BVC2 Series (Weld Ends – Rated 160 bar)

DocumentDownload Datasheet

BVC2 Series (Weld Ends - Rated 160 bar)

Construction ApplicationsIndustrial Applications

Holmbury’s BVC2 Series two-way high-pressure ball valves are designed to suit a wide range of applications. These valves should not be used as flow control valves and should therefore always be fully open or closed. 
Carbon Steel Trivalent Materials

Features

• Floating ball design maximises sealing• Full bore valves provide unrestricted flow path for negligible pressure drop• Open to close in 1/4 turn• Offset handle allows clearance for easy operation 

Accessories

 • Valve locking kits and valve handles are available for the BVC2 Series 

Construction

• Carbon steel body with trivalent plating• Zinc alloy handle • Forged steel option available • Fitted with NBR and POM seals as standard • Also available in AISI 316 stainless steel (See BVS2 Series) 

Applications

• Construction• Mobile Hydraulics• Test Equipment• Machine Tools • General Hydraulics • Agricultural 

AVAILABLE SEALS AND TEMPERATURE RANGE

All carbon steel products have Nitrile Butadiene Rubber seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) seals fitted as standard. Special seal materials available on request.

106°C 223°F

Nitrile

120°C 248°F

EPDM

200°C 392°F

Viton®

300°C 572°F

Kalrez®

-20°C -4°F

Viton®

-25°C -13°F

Kalrez®

-40°C -40°F

Nitrile

-50°C -58°F

EPDM

Abbreviation Trade Name Chemical Name Min Temp. Max Temp.
NBR XNBR Chemigum®, Hycar8, Breon®, Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol® Nitrile Butadiene Rubber Carboxylated Nitrile Rubber -40°C (-40°F) 106°C (223°F)
FKM (FPM) Dai-el®, Fluorel®, Tecnoflon®, Viton® Fluoro-elastomer Rubber -20°C (-4°F) 200°C (392°F)
EPR EPDM Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM® Ethylene Propylene Copolymer Ethylene Propylene Terpolymer -50°C (-58°F) 120°C (248°F)
FVMQ Silastic 1S®, FSE® Fluorosilicone Rubber -65°C (-85°F) 170°C (338°F)
FFKM Perlast®, Kalrez®, Chemraz®, Kaflon® Perfluoroelastomer -25°C (-13°F) 300°C (572°F)